Disclosure : This site contains affiliate links to products. We may receive a commission for purchases made through these links.

7Pin 0.96 Inch IIC/SPI Serial 128×64 White OLED Display Module

Pin 0.96 Inch IIC/SPI Serial 128×64 White OLED Display Module Interface: GND: Ground VCC: Power  (2.8V-5.5V) D0: Clock D1: Data RES: Reset DC: Data/Command CS: Chip Selection Feature: Needn’t backlight, the display unit can self-luminous High resolution: 128 * 64 Viewing angle: > 160 Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. Ultra-low power consumption: full screen lit 0.08W Voltage: 3V ~ 5V DC Working Temperature: -40„ƒ ~ 70 „ƒ Module Size: 27.3 x 27.8 x 3.7mm IIC/SPI Interface, need 4 IO only. Driver IC: SSD1306 What is OLED? OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays and is regarded as the ultimate technology for the next generation of flat-panel displays. The use of OLED technology has the following advantages: 1. A simplified manufacturing process compared to TFT-LCD (See comparison of Picture 1 and Picture 2 below) 2. Self-emitting light, in contrast to the required backlight for TFT-LCD 3. High luminosity 4. Lightweight and thin (less than 2 mm) 5. Low operating voltage and power consumption 6. Wide range of operating temperatures (-40„ƒ to 85„ƒ) Note: If you decide to buy OLED display, you must confirm that you can make it work by yourself, we’

Related Products :